Detector (traductor) de monoxid de carbon
Detectorul (traductorul) de CO E2610-CO face parte din gama de instrumente multifunctionale PluraSense.
Este util pentru parcari subterane, bucatarii si alte spatii inchise unde exista pericolul formarii unei acumulari toxice de monoxid de carbon.
Set-pointurile implicite pentru alarme sunt la 25 si 125 ppm.
Dispune de doua relee cu switch-over care pot fi folosite pentru controlul sitemelor de semnalizare si ventilatie.
Dispozitivul utilizeaza senzor electrochimic pre-calibratcar confera stabilitate, repetabilitate si durata lunga de viata.
Detector (traductor) de monoxid de carbon
Calibration | Carbon Monoxide CO |
Sensing method | Long-life electrochemical cell |
Sampling method | Diffusion |
Detection range | Nominal 0...200 ppm vol CO |
Maximum 0...1000 ppm vol CO | |
Resolution | 1 ppm vol CO |
Accuracy | ±(3% of detection range + 5 ppm CO) |
Sensor lifetime | > 7 years |
Power supply | 24 VDC or 90...265 VAC |
Digital interface | UART |
Alarms | Blinking LED, buzzer 85 dB |
Output relays | 2 relays with switch-over contact |
250 VAC / 30 VDC, 5 A max | |
Default alarm set-points | 25 / 125 ppm vol CO |
Enclosure | ABS plastic with ventilation slots, IP20 |
Dimensions | H85 × W85 × D36 mm |
Operating conditions | -30...+70 °C, 0...95 %RH, no condensation |