Detector (traductor) - transmitter hidrogen
Detectorul (traductorul) de hidrogen E2608-H2 face parte din gama de instrumente multifunctionale PluraSens.
Poate fi utilizat in camere de incarcare a bateriilor, laboratoare, incaperi de stocare gaze, si alte incaperi inchise unde acumularea de hidrogen prezinta un pericol de explozie.
Dispune de doua relee pentru semnalizare si control al ventilatiei. Alarmele vin cu setari implicite la pragurile de 10% si 40% LEL.
Dispozitivul utilizeaza senor metal-oxid pre-calibratcar confera stabilitate, repetabilitate si durata lunga de viata.
Dispune de doua iesiri analogice si o interfata digitala RS485 cu protocol Modbus RTU utilizate pentru conectarea cu sisteme safety.
Detector (traductor) - transmitter hidrogen
- Senzor metal-oxid stabil cu durata lunga de viata
- Domeniu de masurare: 0...100% LEL
- Rezolutie: 0.1% LEL
- Setari implicite alarma: 20% LEL/50% LEL
- 2 × 4-20 mA / 0-10 V, RS485
| Calibration | Hydrogen H2 |
| Sensing method | Long-life metal-oxide gas sensor |
| Sampling method | Diffusion |
| Detection range | 0...100% LEL (0...4 %vol) H2 |
| Resolution | 0,1 %LEL (40 ppm) H2 |
| Accuracy | ± 5 %LEL (± 0,2 %vol) H2 |
| Sensor lifetime | > 10 years |
| Power supply | 11...30 VDC or 90...265 VAC |
| Digital interface | RS485, Modbus RTU protocol |
| Alarms | Buzzer 85 dB |
| Analog outputs | 2 × 4-20 mA / 0-10 V, user settable |
| Output relays | 2 × SPST relays (closing contact), |
| 250 VAC / 30 VDC, 5 A max | |
| Default alarm set-points | 20 %LEL / 50%LEL |
| Enclosure | ABS plastic with ventilation slots, |
| wall mount, protection class IP20 | |
| Dimensions | H85 × W85 × D37 mm |
| Operating conditions | -30...+70 °C, 0...95 %RH, non-condensing |
cerere de oferta
